Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
Artículo en Inglés | MEDLINE | ID: mdl-33624247

RESUMEN

The defensibility of field sampling data collected in support of natural resource damage assessments and other environmental investigations depends on rigorous quality assurance and control both in the field and laboratory. One important step in field procedures is the cleaning of sampling equipment between samples to minimize the carryover of contaminants. Large-scale sampling efforts during the Deepwater Horizon oil spill event have highlighted the importance of understanding how multiple equipment cleaning protocols affect interstation cross-contamination and the resulting chemical data quality. In this study, six field cleaning techniques were tested on metal sampling equipment using two different sediment types spiked with crude oil in order to understand their relative and absolute effectiveness in reducing chemical carryover. The complexity of the cleaning protocols ranged from a simple water and scrub brush application to protocols that included soap and/or solvent. In this study, percent residual hydrocarbon transfer, relative to total loading in sediments, never exceeded 0.032%. The least labor-intensive protocol, water and scrub brush application, had the highest potential for hydrocarbon transfer (0.011-0.032%). Statistical differences were observed among treatments, and it was found that protocols containing a solvent step were more effective than protocols without solvents. Depending on the data quality objectives, the differences may not be meaningful, and choosing a cleaning technique should be governed by health, safety, and environmental factors. The residual hydrocarbons measured after equipment cleanings for all techniques in this study were negligible when compared with other variables that occur during routine sampling and laboratory activities.

2.
Environ Monit Assess ; 187(1): 4106, 2015 Jan.
Artículo en Inglés | MEDLINE | ID: mdl-25394770

RESUMEN

Heavy metal inputs to coastal Alaska ecosystems are driven by sediment loads from glacial meltwater and river outflows. This study characterized the spatial distribution of 16 major and trace metals in five strata in Kachemak Bay, as well as sediment total organic carbon content and grain size. Homer Harbor, a shallow harbor within the study area, contained elevated metal concentrations compared to the other strata. Outside the harbor, several metals, including Cr, Ni, Pb, and Zn, were significantly higher in the eastern strata than in the western portions of the bay. The opposite was true for a few other metals, such as Hg. However, most metal concentrations were below the National Oceanic and Atmospheric Administration's sediment quality guidelines for sediment toxicity to benthic communities.


Asunto(s)
Monitoreo del Ambiente , Sedimentos Geológicos/química , Metales Pesados/análisis , Contaminantes Químicos del Agua/análisis , Alaska , Bahías/química , Recolección de Datos , Ecosistema , Metales Pesados/normas , Contaminantes Químicos del Agua/normas
3.
PLoS One ; 8(8): e70540, 2013.
Artículo en Inglés | MEDLINE | ID: mdl-23950956

RESUMEN

The Deepwater Horizon (DWH) accident in the northern Gulf of Mexico occurred on April 20, 2010 at a water depth of 1525 meters, and a deep-sea plume was detected within one month. Oil contacted and persisted in parts of the bottom of the deep-sea in the Gulf of Mexico. As part of the response to the accident, monitoring cruises were deployed in fall 2010 to measure potential impacts on the two main soft-bottom benthic invertebrate groups: macrofauna and meiofauna. Sediment was collected using a multicorer so that samples for chemical, physical and biological analyses could be taken simultaneously and analyzed using multivariate methods. The footprint of the oil spill was identified by creating a new variable with principal components analysis where the first factor was indicative of the oil spill impacts and this new variable mapped in a geographic information system to identify the area of the oil spill footprint. The most severe relative reduction of faunal abundance and diversity extended to 3 km from the wellhead in all directions covering an area about 24 km(2). Moderate impacts were observed up to 17 km towards the southwest and 8.5 km towards the northeast of the wellhead, covering an area 148 km(2). Benthic effects were correlated to total petroleum hydrocarbon, polycyclic aromatic hydrocarbons and barium concentrations, and distance to the wellhead; but not distance to hydrocarbon seeps. Thus, benthic effects are more likely due to the oil spill, and not natural hydrocarbon seepage. Recovery rates in the deep sea are likely to be slow, on the order of decades or longer.


Asunto(s)
Monitoreo del Ambiente/métodos , Invertebrados/crecimiento & desarrollo , Contaminación por Petróleo/análisis , Contaminantes Químicos del Agua/análisis , Animales , Ecosistema , Geografía , Sedimentos Geológicos/análisis , Sedimentos Geológicos/química , Golfo de México , Hidrocarburos/análisis , Invertebrados/clasificación , Análisis Multivariante , Petróleo/análisis , Hidrocarburos Policíclicos Aromáticos/análisis , Análisis de Componente Principal
4.
Environ Toxicol Chem ; 21(8): 1618-27, 2002 Aug.
Artículo en Inglés | MEDLINE | ID: mdl-12152761

RESUMEN

The Delaware River-Bay system, USA, was the subject of a study by the National Oceanic and Atmospheric Administration that involved chemical and biological analyses, including the use of the biomarker P450 human reporter gene system (HRGS) to document the occurrence and distribution of cytochrome P450 (CYP) 1A1-inducing compounds. Sediment extracts from 81 locations along the Delaware River, Delaware Bay and immediate coastline were tested by utilizing HRGS as an inexpensive screening test, and were also analyzed for polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls, with selected stations analyzed for dioxins and furans. Benthic community degradation has been observed when benzo[a]pyrene equivalents (BaPEq) exceeded 60 microg/g. The average levels of BaPEq for the largely industrialized upper, middle, and lower regions of the Delaware River were 107, 62, and 5 microg/g, respectively, excluding outliers. Tributaries leading into river averaged 21 microg/g BaPEq, whereas the central Bay and open coast had relatively low values (2.0 and 0.5 microg/g BaPEq, respectively). The HRGS values were highly correlated with total PAHs measured in the same sediment samples (r2 = 0.81). Overall, contamination levels consistently decreased from the upper and middle river sites as collection locations progressed down through the lower river and bay to the coast. Thus, despite the relatively high contaminant load in the river system, Delaware Bay and the immediate coastline seem to have relatively low levels of contaminants, and, therefore, impacts on the benthic organisms in the bay and coast would not be expected from these findings.


Asunto(s)
Biomarcadores/análisis , Citocromo P-450 CYP1A1/análisis , Citocromo P-450 CYP1A1/biosíntesis , Genes Reporteros/genética , Sedimentos Geológicos/química , Hidrocarburos Policíclicos Aromáticos/análisis , Contaminantes Químicos del Agua/análisis , Animales , Bioensayo/métodos , Delaware , Monitoreo del Ambiente , Inducción Enzimática , Humanos , Hidrocarburos Policíclicos Aromáticos/farmacología , Contaminantes Químicos del Agua/farmacología
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...